• Home

The Solar DIY Blog

Learn More Pay Less

Feed on
Posts
Comments
« Brendan Condon’s talk World Environment day Part 2/3
Simple DIY Solar Tracker »

Simple Solar Update – Inexpensive Lead-Acid Battery

Dec 7th, 2008 by Mr.Burton

I was able to purchase this “Lawn and Garden” Lead-Acid battery for less than $20 at Wal*Mart. So, I thought it would be worth experimenting with since its size and capacity will probably reduce the number of times I need to charge it (compared to the smaller gel cells I featured in my previous video: http://www.youtube.com/watch?v=nHbx_Qhc8mU). The battery is rated at 275 “Cold-cranking” amps, which isn’t of much value to me since I’m not starting a motor or anything. Although it doesn’t say, a quick internet search suggests this battery is rated at about 18 amp-hours – which puts it at about one third the cost of a comparable gel cell. Problem is, it’s probably not rated for much of a deep discharge since lawn equipment provides a continuous trickle charge. Nevertheless, I’ll keep experimenting with it to see if it’s cost-effective. I use an in-line “Watts Up” meter to monitor the voltage. So far, I’ve allowed it to drop below 12 volts (the QRP radio gear I power with it is very voltage tolerant). With a half day of full sunlight I’m able to bring it back up to well over 13 volts – which last many days of lower power communications on my amateur radio station.

In the video I also mention that I’m now using Anderson “Power-Pole” connectors to eliminate a lot of the clip leads I’ve been using. Actually, I’ve been using these connectors for over a year now but just got around to introducing them to my simple solar stuff. They’re great connectors and seem to be growing in popularity as a low voltage standard. Although not seen in this video, at times I have used a charge controller, or simple diode, to keep the batteries from discharging into the solar panel when it’s cloudy and I can’t be as attentive…

Here’s a link to my personal solar power page:

http://www.rogerwehdell.com/solar.html

And here’s a link to a page about my amateur radio station – the place I use most of the solar power I generate:

http://www.rogerwendell.com/qrp.html

05-25-2008

Duration : 0:1:30


Technorati Tags: anderson, battery, chargng, connectors, cost, lead-acid, pole, power, simple, Solar, with

Tags: anderson, battery, chargng, connectors, cost, lead-acid, pole, power, simple, Solar, with

Posted in solar cost

7 Responses to “Simple Solar Update – Inexpensive Lead-Acid Battery”

  1. on 07 Dec 2008 at 10:52 pm112643

    If you live Canada. …
    If you live Canada. CanadianTire has solar panels.

  2. on 07 Dec 2008 at 10:52 pm2zeekzilch

    I haven’t purchased …
    I haven’t purchased any new panels but would probably recommend you search HomePower magazine for the many options…

  3. on 07 Dec 2008 at 10:52 pm3Josiah531

    Gonna have the …
    Gonna have the start my setup soon. What is a good source for good PV panels that are priced well?

  4. on 07 Dec 2008 at 10:52 pm4flir67

    I have the exact …
    I have the exact same setup, my system takes 3 days of full sun… I leave mine hooked up constantly. about to switch over to deep cycle soon.

  5. on 07 Dec 2008 at 10:52 pm5zeekzilch

    Just a guess, but …
    Just a guess, but probably two full days of direct sunlight would bring a dead car battery , of average size, back to full life…

    Roger J. Wendell
    Golden, Colorado

  6. on 07 Dec 2008 at 10:52 pm6baseballmesiah

    Just curious. how …
    Just curious. how long would it take to charge a dead car battery with that panel and set up you’re using?

  7. on 07 Dec 2008 at 10:52 pm7BasementBen

    I bought one of …
    I bought one of those walmart batteries, and it was $20, but it doesnt work well, it seems really sulfated or something, hehe.

  • Reduce The Cost Of Solar


  • Categories

    • solar cost
    • solar diy
    • solar do it yourself
    • solar panels cost
    • Uncategorized
Theme by